Nortel Enterprise Edge 2.0 Manual

Also see for Enterprise Edge 2.0 Messaging: Quick reference guide User guide Programming guide User guide

Contents

Nortel Enterprise Edge 2.0 Manual Manual pdf 25 page image

Answering calls 25P0911589 Issue 03 Enterprise Edge 2.0 Feature Programming Telephone GuidePutting a conference on holdYou can put a conference on hold, allowing the other two people to continuespeaking to each other by pressing ˙.You can connect again to the conference by pressing either of the held line buttons.For the M7100 telephone, press ˙.Splitting a conferenceYou can talk with one person while the other person is on hold.On a M7208, M7310 or M7324 telephone:1. Press the line button of the person with who you want to speak. The otherperson is automatically put on hold.On a M7100 telephone:1. Press ƒ£‹. The first party is on hold.2. Press ˙, if necessary, to switch parties.You can establish again the conference.3. Press ƒ‹.4. Take the held call off hold. This is not necessary for the M7100 telephone.Removing from a conferenceƒ‡‚You can remove from a conference, and connect the other two callers through yourEnterprise Edge system.Enter the Transfer feature code ƒ‡‚.When you remove from a conference using the Transfer feature, and both callersare from outside your system, one of the callers must have called you on adisconnect supervised line, or the call disconnects.