Transferring calls 49P0911589 Issue 03 Enterprise Edge 2.0 Feature Programming Telephone GuideYour installer can disable Call Park.DisplaysUsing CallbackWhen you direct a call you have answered to another telephone, the systemmonitors the call to make sure it is answered. If no one answers the call within a setlength of time, the system returns it back to you.Callback generates a many different displays. Most occur after a set delay and arelisted in the index. Some occur immediately if the telephone to which you direct acall is out of service or not available. These different displays are listed with thedescriptions of the specific features such as Transfer or Camp-on.TipAnswered Hunt Group calls are parked in the same method as other calls. Formore information about Hunt Groups see Hunt Groups on page 81.The person you were talking to has parked your call. Youcannot park the same call.You have tried to use Call Park with no active call on yourtelephone. If the call you want to park is on hold, re-connectto the call before you park it.You have entered an invalid retrieval code.There was no call on the retrieval code you entered.You have tried to park a conference call. Split theconference and park the calls separately. The person whoretrieves the calls can re-connect the conference.Record the code shown. Use Page (ƒfl‚) orpress PAGE to announce the call and its retrieval code.All available retrieval codes are in use. Transfer the call ortake a message instead.For other displays, see Common feature displays on page 121.Already parkedNo call to parkInvalid numberNo call on: 101Park deniedParked on: 402PAGE EXITParking full
