76 Customizing your telephoneEnterprise Edge 2.0 Feature Programming Telephone Guide P0911589 Issue 03Types of button caps• Unlabeled, clear button capswith appropriate green or grey paper for entering line numbers, telephonenumbers, and features• Pre-printed, colored button capsin green or greySome examples of printed button capsIdentifying the telephones1. Write each telephone numbers on the labels and attach to the appropriateEnterprise Edge telephones.2. Write the telephone number and the internal number on the appropriatereceiver card for each type and color of telephone to be installed.3. Cover the receiver card under the receiver of each telephone with the plasticlens.Enterprise Edge default button assignmentsDuring Startup, the Enterprise Edge installer chooses one of the available templates.Default features are assigned automatically to the programmable buttons onEnterprise Edge telephones, and vary with the template and the telephone. Thedefault features are listed in the following tables in this chapter.Green caps Grey caps¬ μ© ßTipTo make identification of line types easier, use printed green button caps forlines that support incoming and outgoing calls. Use clear button caps for targetlines that are incoming only.TipsEnterprise Edge telephones are shipped from the factory with the button capsin position for the PBX template.Please ask your customer service representative to determine the type oftemplate programmed into your system before applying button assignments.
