Nortel Modular ICS 6.0 Installer's Manual

Also see for Modular ICS 6.0: Guide

Contents

36 / What’s new with NorstarModular ICS 6.0 Installer Guide P0992638 03— As well, the EURO PRI protocol is supported for thisprofile.— In addition, the central office ETSI PRI features:Network Call Redirection and Malicious Caller ID(MCID) can be used if they are allowed by your serviceprovider. Refer to ETSI: Network diversion and MCID(profile 2 only) on page 442.• Line renumbering: Due to the addition of ETSI to Profile2, the line numbering for the entire system has beenrealigned to accommodate the extra lines provided byETSI lines. When you perform an upgrade, existing lineassignments will be automatically updated. Refer to Trunkmodule line numbering on page 205 for a comparison tableof line numbering based on software versions. Refer toTrunkMod on page 467 for detailed line numbering basedon the type of trunk module that is installed. This changeincludes the target line numbers.• Due to the expansion of the system speed dial featurecodes up to 255, the user speed dial list has been changedto codes 256 to 279 (24 codes, no change from existingsystems). Refer to User prefernces on page 321.