System prgrming / 403P0992638 03 Modular ICS 6.0 Installer GuideThis feature also allows the automatic changing betweenNorth American daylight savings and standard time.The Automatic Time and Date feature automatically overridesany manually-programmed changes to the time and date.Note: The year is not included with the time and dateinformation and must be programmed manually if thecurrent year differs from the network time.Press CHANGE to choose Y or N.Setting SWCA controlsYou can assign up to 16 System Wide Call Appearance(SWCA) keys to each telephone in a group. This is performedusing the Key progrming heading under Terminals&Sets/UserPreferences headings. SWCA controls are controlled byfeature codes ²¥ÞÛâ to ²¥ÞÜÞ. Theuser can also program this feature using these feature codes.Refer to the Modular Plus System Administration Guide for ainstructions about programming features onto memory keys.On the system, under Feature Settings, SWCA Cntl youdefine how incoming calls get associated to SWCA keys andhow Hold will handle the calls.The Auto Associate setting determines if answered calls willautomatically be assigned to SWCA keys (Auto Associate =Y).If you want the user to press the Hold button or a free SWCAkey before the call transfers to a SWCA key, set AutoAssociate to N. Calls remain assigned to SWCA keys for theduration of the call.
