Telco features / 447P0992638 03 Modular ICS 6.0 Installer GuideTelco featuresCurrently the two features accessed under this heading are thesettings for the voice mail connections for your system, andhow to set up outgoing name and number blocking (ONN).With the display showing System prgming press ‘until the display shows Telco features.VMsg ctr tel#sIf you subscribe to a voice message service outside of yourlocal system, you can access it through your Norstar system.This includes centralized voice mail that is installed on anothersystem within the private network that your system isconnected to. Refer to Central voice mail and Auto Attendantwith Norstar on page 146.This setting specifies the external telephone numbers that aredialed by the Message feature to retrieve voice messages.1. At the Telco Features prompt, press ≠.Vmsg ctr tel# displays.2. Press ≠. VMsg center 1 displays.3. Press ≠. Use: Line displays.4. Press CHANGE to select either Line or Routing tbl.5. Press ‘. Tel#: No number displays.Tip - If you choose Routing tbl, you must ensure that thisnumber contains the routing code, and that the number isentered in the routing table and routed to the correct line pool.