100 Chapter 5 Managing the Passport 8672ATME Module with the CLI209195-BTable 30 describes the information fields for the show ports stats atmfepathcurrent command.show ports stats atm fepathintervalThis command displays statistics (Figure 39) on the far end path over a 15-minuteinterval. You specify the interval or span of intervals to display. The commanduses the syntax:show ports stats atm fepathinterval <intervalid> [<ports>]Table 30 Information fields for the show ports stats atm fepathcurrent commandField DescriptionPORT NUM Port number.ERRORED SECONDSCOUNT (ES)Errored Second (ES) is a second with one or more CodingViolations (CV) or one or more incoming defects (forexample, SEF, LOS, AIS, LOP).SEVERELY ERROREDCOUNT (SES)Severely Errored Second (SES) is a second with x or moreCVs, or one or more incoming defects.CODE VIOLATION COUNT(CV-P)Coding Violations (CV) are Bit Interleaved Parity (BIP)errors that are detected in the incoming signal. CVcounters are incremented for each BIP error detected.UNAVAILABLE SECONDS(UAS)The number of seconds that the interface is unavailable.