Chapter 4 Managing the Passport 8672ATME Module with Device Manager 57Using the Passport 8672ATME ModuleFigure 15 MDA dialog boxTable 7 describes the MDA dialog box fields.Enabling or disabling a portYou can enable or disable a port by two methods. To enable or disable a portthrough the Device Manager menu bar:1 On the device view, highlight a port.2 From the Device Manager menu bar, choose Edit > Port.The Port dialog box opens with the Interface tab displayed (Figure 12).3 In the AdminStatus area, click up to enable the port, or click down to disablethe port.Table 7 MDA dialog box fieldsField DescriptionType Media type:• rcOc3BaseSM.• rcOc3BaseMM.• rcOc12BaseSM.• rcOc12BaseMM.Description MDA type:• Quad OC-3c SM — quad port OC-3c single-mode fiber.• Quad OC-3c MM — quad port OC-3c multimode fiber.• OC-12c SM — single port OC-12c single-mode fiber.• OC-12c MM — single port OC-12c multimode fiber.
