84 Chapter 5 Managing the Passport 8672ATME Module with the CLI209195-BTable 21 config atm pvc 1483 ipx command parameters and variablesconfig atm info commandFigure 29 shows a sample of the output resulting from executing the config atminfo command.Figure 29 Sample output for the config atm info commandParameters and variables Descriptioncreate Creates a routed 1483 IPX circuit on the specified VLAN to thespecified remote router interface. The optional parameters are:• vid means VLAN ID number.• vpi.vci means circuit VPI number and the circuit VCI numbers,respectively; they are separated by a period.• ipx is the IPX Network number of the remote router interface. If thisnumber is not given, the first IPX Network number configured forthe specified VLAN is used.Note that the VLAN ID must be previously configured for IPX on thisport.No ARP functionality is available on this IPX segment.delete Deletes the routed 1483 IPX circuit on the specified VLAN.info Displays information on routed 1483 IPX circuits.number-vpi-bits : 4scrambling : Enableframing-mode : SONETclock-source : Free Runningloop-back-mode : offstate : up
