132 Chapter 6 Configuring the Passport 8672ATME Module209195-BTable 46 describes the IP, VLAN, Insert IP Address dialog box fields.5 In the IP Address field, type the IP address for the VLAN.6 In the Net Mask field, type the net mask value.7 Click Insert.The IP, VLAN, Insert IP Address dialog box closes and the IP, VLAN dialogbox is redisplayed.8 Click Close.Enabling RIP routing1 From the Device Manager menu bar, choose VLAN > VLANs.The VLAN dialog box opens with the Basic tab displayed (Figure 51).Table 42 on page 122 describes the VLAN Basic tab fields.2 Click one of the VLANs.3 Click IP.The IP, VLAN dialog box opens with the IP Address tab displayed (Figure 56on page 131).Table 45 on page 131 describes the IP Address tab fields.Table 46 IP, VLAN, Insert IP Address dialog box fieldsField DescriptionIp Address IP address of the VLANNet Mask Subnet mask associated with the IP address of the entry.Note: Use different subnets for each IP address.Note: The Passport 8672ATME Module supports only RIP version 2.
