140 Chapter 6 Configuring the Passport 8672ATME Module209195-BFigure 62 IPX VLAN, Insert dialog boxTable 50 describes the IPX VLAN, Insert dialog box fields.5 In the NetAddr field, configure the IPX network numbers for the VLAN.6 In the Encap field, click the encapsulation type.7 Click Insert.The IPX VLAN, Insert dialog box closes, and the IPX tab is redisplayed.8 Click Close.Enabling IPX forwardingTo enable IPX forwarding on both VLANs:1 From the Device Manager menu bar, choose IPX Routing > IPX.The IPX dialog box opens with the Globals tab displayed (Figure 63).Figure 63 Globals tabTable 50 IPX VLAN, Insert dialog box fieldsField DescriptionNetAddr The IP address of this VLAN.Encap Encapsulation type: ethernetii, snap, llc, or raw.