270 GroupWise 7 Installation Guidenovdocx (en) 22 June 2009Table 19-1 Creating a Connection from Windows to Linux19.1.2 Accessing a Domain or Post Office on Linux fromWindows ConsoleOneAfter you have made the Linux server visible from Windows:1 Map a drive to the domain directory on the Linux server.2 In Windows ConsoleOne, click Tools > GroupWise System Operations > Select Domain.3 Browse to and select the domain directory, then click OK.You can now use Windows ConsoleOne to administer all GroupWise objects that belong to thedomain that is located on Linux.19.2 Using Linux ConsoleOne to AccessDomains and Post Offices on NetWare orWindowsIn order for you to be able to use ConsoleOne on Linux to administer GroupWise domains, postoffices, and agents that are located on NetWare or Windows, the NetWare or Windows serverswhere the domains, post offices, and agents are located must be accessible from Linux. Section 19.2.1, “Making a NetWare or Windows Server Visible from Linux,” on page 271 Section 19.2.2, “Accessing a Domain or Post Office on NetWare or Windows from LinuxConsoleOne,” on page 271Operating System Connection MethodOpen EnterpriseServer (OES)LinuxUse the NetWare Core Protocol TM (NCP TM ) Server to create an NCP volume on theLinux server that will be visible from Windows just as a NetWare volume would be.On the Linux server, become root, then enter the following commands:ncpcon create volume volume_name directoryncpcon set cross_protocol_locks=1From a Windows workstation or server where the Novell client is installed, you cannow use the Novell Map Network Drive feature to map a drive to the volume on yourLinux server, and Windows-type file locking is respected by Linux.For more information about NCP Server, see the NCP Server Administration Guidefor Linux (http://www.novell.com/documentation/oes/ncp_lx/data/h9izvdye.html#h9izvdye).SUSE LinuxEnterprise Server(SLES)Use Samba to create a Windows share on the Linux server that will be visible fromWindows just as a directory on another Windows server would be. For instructionson setting up a Samba share, see the SUSE Linux Enterprise Server Administrationand Installation Guide (http://www.novell.com/documentation/sles10/pdfdoc/sles_admin/sles_admin.pdf).From a Windows workstation or server, you can now use the Windows MapNetwork Drive feature to map a drive to the directory on your Linux server.
