Using an LDAP server 8VarioLink 2221/2821/3621 8-38 Using an LDAP server8.1 Searching the destination information from the serverYou can search a destination from the LDAP server. To use the LDAP searchfunction, set "LDAP Search" in the LDAP Setting screen (displayed from theNetwork Setting screen) to "Yes" in advance to enable LDAP searches, andregister the information of the LDAP server to be connected. For details, referto "Specifying the network settings" on page 3-4.To register the LDAP server, refer to "LDAP Setting" on page 3-44.2 NoteIf "^" is included in the registered information, the destination may not befound correctly.Basic Search and Detail SearchThe LDAP server contains various types of destination information. With theLDAP search function of this machine, you can use a basic search methodby specifying a keyword that meets the information contained in the address,or you can use an advanced search method by specifying detailed searchitems and conditions.2 NoteIf 11 or more characters are entered for the keyword, the tenth characteris replaced with the last character entered, preventing the search frombeing performed correctly. Therefore, be sure to enter no more than 10characters.Item DescriptionBasic Search If a keyword is entered, the search can be performedbased on the keyword. The keyword can contain up to 10characters.Detail Search Searches the address by specifying a keyword for varioussearch items and specifying conditions. Up to 10 charac-ters can be entered. In addition, four conditions can bespecified at a time.The following search items can be selected: Full name, E-Mail, Last Name, First Name, Fax, City, Company, De-partmentThe following conditions can be selected: Contains (key-word), AND, START, End, OFF
