Setup 3VarioLink 2221/2821/3621 3-193.6 SMTP SettingsSettings can be specified for the following.2 NoteThe following appear when bits 6 and 2 of mode 380 are set to "1" in theSoftware Switch Setting screen. For details, refer to "Specifying softwareswitch settings (machine functions)" on page 10-28.- SMTP Authentication User Name- SMTP Authentication PasswordIf bit 4 of mode 371 is set to "1" in the Software Switch Setting screen,two SMTP servers can be registered. For details, refer to "Specifyingsoftware switch settings (machine functions)" on page 10-28.Item DescriptionSMTP Server Address Specify when performing Scan to E-Mail or Internet faxing. In addi-tion, specify when using the E-Mail notification function with Scan toFTP, Scan to SMB or Scan to HDD.Contact the network administrator for the information to be entered.E-Mail Address Enter the e-mail address of this machine.Contact the network administrator for the information to be entered.SMTP AuthenticationUser NameSpecify the user name when using the e-mail transmission authenti-cation (SMTP authentication) function.Contact the network administrator for the information to be entered.It is not necessary to specify the setting when the SMTP authentica-tion user name and the POP3 user name are the same.SMTP AuthenticationPasswordSpecify the password when using the e-mail transmission authenti-cation (SMTP authentication) function.Contact the network administrator for the information to be entered.It is not necessary to specify the setting when the SMTP authentica-tion password and the POP3 password are the same.
