Specifying management settings 10VarioLink 2221/2821/3621 10-35Specifying administrator forwarding settings (mode 198)You can specify whether a received document is forwarded to a destinationspecified by the administrator.Factory settingsSpecifying settingsThe shaded cells represent the factory settings. The page numbers on theright refer to the descriptions of the corresponding functions.(*) Bit 7 of mode 198 is enabled only when "1 (transmit)" is specified.Bit 7 6 5 4 3 2 1 0Setting 1 1 0 1 0 0 0 0 (HEX: D0)Bit Description Setting Description Page Ref-erence7 Specifies whether a receiveddocument is forwarded to adestination specified by theadministrator.0 Not forwarded page 10-201 Forwarded6 Specifies whether to enableTX Forwarding when scan-ning.(*)0 Not forwarded ---------1 Forwarded5, 4 Specifies the print condi-tions of transmission reportsfor TX Forwarding.(*)00 Not output ---------01 Undeliverable10 Always prints11 *Do not specify these set-tings.3, 2, 1, 0 ----------------------------- 0000 *Do not change these bitswhen specifying settings forthis function.---------
