Specifying management settings 10VarioLink 2221/2821/3621 10-39Specifying SMTP transmission timeout settings (mode 356)You can specify the time until a timeout of the SMTP server connectionoccurs when sending e-mail messages.Factory settingsSpecifying settingsThe shaded cells represent the factory settings. The page numbers on theright refer to the descriptions of the corresponding functions.(*) After changing the settings, the machine must be turned off, then on again.2 ReminderWhen turning the machine off, then on again with the main power switch,wait about 10 seconds to turn the machine on after turning it off.The machine may not operate correctly if it is turned on immediately afterbeing turned off.Bit 7 6 5 4 3 2 1 0Setting 0 1 0 0 0 0 0 0 (HEX: 40)Bit Description Setting Description PageRefer-ence7, 6, 5, 4 Specifies the time until atimeout of the SMTP serverconnection occurs whensending e-mail messages.(*)0001 30 seconds ---------0010 60 seconds0011 90 seconds0100 120 seconds0101 150 seconds0110 180 seconds0111 210 seconds1000 240 seconds1001 270 seconds1010 300 secondsOther *Do not specify other set-tings than the above.3, 2, 1, 0 ----------------------------- 0000 *Do not change these bitswhen specifying settings forthis function.---------
