9 Specifying settings using Web Connection9-76 VarioLink 2221/2821/36219.18 E-Mail/Internet FAX (Administrator mode)Transmission settings for the Scan to E-Mail and Internet fax operations canbe specified.Settings can be specified for the following.Specify settings for the following.POP3* If the setting of a parameter marked with [*] is changed, turn this machine off, then on again.Item DescriptionPOP3 Specify the POP3 server for sending Internet faxes.SMTP Specify the SMTP server for sending data with the Scan to E-Mail operation.Subject/Text Specify the subject and any text to be used when sending data with the Scanto E-Mail or Internet fax operation.Other Specify all other related send and receive settings.Item DescriptionPOP3 ServerAddressSpecify the settings required to receive Internet faxes.Type in the IP address or host name (up to 64 characters).For details on the settings to be specified, contact the network administrator.POP3 UserNameSpecify the POP3 user name (up to 64 characters) of this machine.For details on the settings to be specified, contact the network administrator.POP3 Pass-wordSpecify the POP3 password (up to 32 characters) of this machine.For details on the settings to be specified, contact the network administrator.2 NoteThe entered password appears as "••••". To correct the en-tered password, clear "••••", and then type in the correct pass-word.Auto-RX Check Select whether to automatically check for received e-mail messages (Internetfax) when connected to the POP3 server.Auto-RX CheckIntervalIf "Auto-RX Check" is set to "Yes", type in the time interval (between 1 and 99)at which the check is performed.Port Number Type in the number (between 1 and 65535) of the port where the POP3 serveris connected.POP3 Timeout[*]Select the time until the connection with the POP3 server is timed out. Selectfrom 30, 60, 90, 120, 150, 180, 210, 240, 270, and 300 seconds.APOP [*] Select whether or not APOP authentication is enabled.
