9 Specifying settings using Web Connection9-62 VarioLink 2221/2821/36219.13 Report Settings (Administrator mode)The conditions for outputting the transmission results report and activityreport can be specified.Settings can be specified for the following.Item DescriptionTX Report(Single destina-tion)Select the conditions for outputting the results report for a transmission to asingle destination.Output On: Select this setting to output the report, regardless of the transmis-sion result.If TX Fail: Select this setting to output the report only if the transmission failed.Output Off: Select this setting to not output the report, regardless of the trans-mission result.TX Report(Multiple desti-nations)Select the conditions for outputting the results report for a transmission tomultiple destinations.Output On: Select this setting to output the report, regardless of the transmis-sion result.If TX Fail: Select this setting to output the report only if the transmission failed.Output Off: Select this setting to not output the report, regardless of the trans-mission result.Activity Report Select whether or not the activity report is outputted with every 50 transmis-sions.
