Specifying settings using Web Connection 9VarioLink 2221/2821/3621 9-719.17 LDAP Server Setting (Administrator mode)If LDAP searches are enabled, the LDAP server to be accessed can beregistered. Up to 5 LDAP servers can be registered in this machine.For details on the LDAP search methods, refer to "Searching the destinationinformation from the server" on page 8-3.2 ReminderIf "LDAP" is not set to "Enable", the LDAP server information cannot beregistered. To register the LDAP server information, be sure to set"LDAP" to "Enable".If "LDAP Server Setting" is clicked, settings can be specified for thefollowing.Item DescriptionLDAP ServerNameEnter the LDAP server name. Up to 16 characters can be entered.LDAP ServerAddress: IP Ad-dressSpecify the IP address of the LDAP server.LDAP ServerAddress: HostNameEnter the LDAP server host name. Up to 64 characters can be entered.SSL/TLS Select whether to perform SSL/TLS encryption of the sent data.Port Number Type in the port number (between 1 and 65535) used to communicate with theLDAP server.Search Base Specify the location on the LDAP server where searches are to be started. Upto 255 characters can be entered.ConnectiontimeoutType in the time (between 5 and 300 seconds) when a search is timed out.Maximumnumber ofSearchType in the maximum number of hits (between 5 and 100) to be received asLDAP search results.AuthenticationSettingSelect the LDAP authentication method.Domain Name Specify a setting when "Authentication Setting" is set to "Active Directory".Up to 64 characters can be entered.Login Name Specify a setting when "Authentication Setting" is not set to "Anonymous".Up to 64 alphanumeric characters and symbols can be entered, excluding ^.Password Specify a setting when "Authentication Setting" is not set to "Anonymous".Up to 32 alphanumeric characters and symbols can be entered, excluding ^.[Check con-nection]Click to use the entered settings and check the connection to the LDAP serv-er.
