156 Chapter 6 The copy functionConcatenation and chapterization[57][57] Concatenation: no empty page between subsetsExample: How to use concatenation and chapterization1. Put a 1-sided subset that contains an odd number of pages, face down and inreadable form into the automatic document feeder.2. Press the key for a template, for example 'Standard job'.3. Press the key for 'Original'.4. Define the settings for the original. Make sure that the setting for the original is1-sided.5. Press the key for 'Print'.6. Define the settings for the document to print. Make sure that the print is set to 2-sided(so that you can use the function concatenation and chapterization).7. Press the set-build key ( ) to scan the 1-sided subset.How to scan the second subset1. Put the second subset into the automatic document feeder.2. Repeat the steps 3 to 6 from the above procedure.3. Press the set-build key ( ) to add the subset.ResultAfter you press the set-build key for the second time, a message appears. An emptypage is detected.The last page of the first subset is printed on the front of a sheet. The back of thesheet is empty. You can select to print on the empty page, or not.[58][58] Empty page detected dialogue box
