77Possible actions on jobs in the job queue[30][30] The job queue manager (1 – 2)Function Description'Move to memory' This function takes the selected job out of the job queue. Thejob is moved to the memory.'Move to memory' offers 3 advantages.■ Automatic print jobs or copy jobs that were sent directlyto the job queue can be stored in the memory for reuse.■ You can edit the jobs that you moved to the memory. The'Edit...' function is not available in the job queue.■ In combination with bundle printing, the 'Move tomemory' function allows you to define or rearrange thechronological order of jobs in the memory that you wantto print in a bundle.Note: 'Move to memory' is not possible forstreaming jobs and print-while-RIP jobs.'Stop after this' The Océ VarioPrint® 2100/2110 does not print the jobs belowthe 'Stop after this' bar.You can put the 'Stop after this' bar at the following places.■ Between jobs in the job queue■ On top of an empty job queue.Note: You have only one 'Stop after this' bar atyour disposal. You can reposition the bar atanother position in the job queue. To move the bar,press the arrow-up or arrow-down keys and pressthe key for 'Stop after this' again. To remove thebar, select the bar with the arrow-up andarrow-down keys and press the key for 'Delete'.'Delete' You can delete a job in the job queue except a job that scansor prints. Press the Stop key or the Correction key tostop and cancel a job that prints or scans.
