265Load custom size mediaLoad custom size mediaIntroductionTask for operators, key operatorsWhen you use custom size media and oversize media, you must pay attention tosome things. The Océ VarioPrint® 2100/2110 has format detection, but only forstandard sizes. These sizes are A4, A3, Letter, Legal, Tabloid and B4. The OcéVarioPrint® 2100/2110 detects the size of the media in the paper trays in ranges. TheOcé VarioPrint® 2100/2110 is not able to detect the sizes of custom size media. Youmust enter the exact sizes of your custom size media in the 'Media catalogue'.Note: If you want to use custom size media on a VarioPrint® 2100, you need toupgrade your system with a licence for custom size media.When you use custom size and oversize media, you must do the following actions.1. Put the paper into the paper trays.2. Configure the media in the 'Media catalogue'.3. Program the media in the 'Paper manager'. Here you link the media to a paper tray.Before you beginPut the paper into the paper trays. If you use oversize paper, you must follow aspecial procedure (see ‘Load oversize media’ on page 263).Attention: Take care when you use custom size media and oversize media. Youmust indicate the exact sizes for your custom size media. Next, you must selectthe correct media in the 'Paper manager'. The Océ VarioPrint® 2100/2110 has noformat detection for custom size media. If the media programmed for a papertray in the 'Paper manager' does not match the detected size and orientation inthe paper trays, the Océ VarioPrint® 2100/2110 cannot always detect themismatch. A system failure can be the result.How to program a custom size media in the 'Media catalogue'1. Access the Océ VarioPrint® 2100/2110 Settings Editor on the Océ Smart Imager.2. Access the 'Media catalogue' in the 'Media' section.3. Click 'Add'.4. Enter a name for your custom size media.5. Enter the size and orientation.
