267Load the tab sheetsLoad the tab sheetsIntroductionTask for operators, key operatorsWhen you print on tab sheets, the sheets can have the following destinations.■ The finisher■ The upper output■ The external finisher (if configured).Note: You can not use tab sheets in combination with the optional booklet maker.Depending on the destination of the print job, you must load different sets of tabsheets.The following table shows the types of tab sheets that are required for thedestinations.[77]How to load tab sheets when you print to the finisher and the upper output1. Take a pack of reverse collated tab sheets.Note: In reverse collated tab sheets, the tab sheets are counted down from the lastnumber to 1.2. Do the steps 1 - 5 of the procedure for standard media.3. Put the tab sheets face down and header down into the paper tray.[77] Types of tab sheetsDestination Type of tab sheet■ Finisher■ Upper outputReverse collated tab sheetsIn reverse collated tab sheets, the highest number is ontop of the set. The lowest number is at the bottom (forexample 5, 4, 3, 2, 1)External finisher Straight collated tab sheetsIn straight collated tab sheets, the lowest number is ontop of the set. The highest number is at the bottom (forexample 1, 2, 3, 4, 5)
