25Restart the systemRestart the systemIntroductionTask for key operators, system administratorsWhen you change settings in the Océ VarioPrint® 2100/2110 Settings Editor, thesoftware may ask you to restart the system. A restart activates the new, changedsettings.If you restart the system, the following occurs.■ The Océ VarioPrint® 2100/2110 Settings Editor changes become active■ The jobs in the mailbox are saved■ The job number of new copy jobs and scan jobs is set to 1.You must restart the system in the Océ VarioPrint® 2100/2110 Settings Editor.Follow the procedure below to restart the system.How to restart the system1. Start the Océ VarioPrint® 2100/2110 Settings Editor in your web browser.2. Click 'Service'.3. Click 'Control'.4. Click 'Restart' .The screen displays 'Restart the Océ Smart Imager.'.5. Click 'OK'.The system restarts.The screen of the operator panel displays the message 'When the flashes, you canturn off the system.Press Close to continue'.Note: The system waits until all active jobs are finished.6. Press the function key 'Close' on the operator panel.The printer goes into the sleep mode.7. Press the On/Off button on the printer to wake up the system.The LED in the On/Off button changes from amber to green.
