198 Chapter 7 The scan function (optional)Original input on the glass plate or into the ADFPortrait original, long edge feed■ Hold the original in front of you in readable position.■ Turn the original over the long edge.■ Place the original into the automatic document feeder or on the glass plate.Note: You get the maximum productivity when you scan A4 originals in long edgefeed direction.Portrait original, short edge feed■ Hold the original in front of you in readable position.■ Rotate the original 90 degrees anti-clockwise.■ Turn the original over the long edge.■ Place it into the automatic document feeder or on the glass plate.Landscape original, short edge feed■ Hold the original in front of you in readable position.■ Turn the original over the short edge.■ Place it into the automatic document feeder or on the glass plate.Note: If you scan an original which long edge size is greater than the vertical glassplate size, you must always use a short edge feed. Long edge feed does not fit intothe automatic document feeder.Glass plate position[63]Note: If you scan an original which long edge size is greater than the vertical glassplate size, you must always scan the original in horizontal position.[63] Glass plate positionComponent Function[65][65] Glass plate scanportraitScan a portrait document in vertical position on the glassplate.[66][66] Glass plate scanlandscapeScan a landscape document in horizontal position on the glassplate.
