123456BASIC COPY MODES- 43 -● BASIC COPY MODESBefore Using Copying FunctionsDefault settingsThis equipment is under its “default settings” when the power isturned ON, namely, if no setting change has been applied yet,the equipment’s settings return to the default ones when theenergy saving mode is cleared or the [RESET] button on thecontrol panel is pressed. The default settings for basic copymodes at installation are shown below.The default settings are changeable.Confirming the set functionsIf you press [SETTINGS] on the touch panel, the menu shownbelow is displayed. On this menu, you can view the functionsthat are currently set.Switching to the function setting menuTo change the functions on the current menu, press thecorresponding buttons. The desired setting menu will thenappear.Clearing the set functionsIf you want to clear any copy function setting, press [RESET]on the corresponding setting menu.However, for FULL IMAGE on the EDIT menu, also press thehighlighted button to clear the setting.Clearing all settings changedWhen you press the [RESET] button on the control panel, allthe function changes will be cleared.Item Default settingReproduction ratio 100%Copy quantity 1Paper selection Automatic Paper Selection(APS)Simplex/Duplex 1-sided original -> 1-sided copyDensity adjustment Manual adjustmentColor mode FULL COLOROriginal mode TEXT/PHOTOFinishing mode When using the original glass:NON-SORT NON-STAPLEWhen using the RADF(Reversing Automatic DocumentFeeder):SORTFeeding mode when using theRADFContinuous feed mode
