Oki MC780 User Manual

Also see for ES7460 MFP: User manual User manual User manual User manual User manual

Contents

Oki MC780 User Manual Manual pdf 57 page image

BASIC COPY MODES- 57 -123456Memo• You can store data in an e-Filing box with the Store to e-Filing function. For details, refer to the e-Filing Guide.1 Place the original(s).2 Press [STORAGE] on the touch panel.3 Press [COPY & FILE] on the touch panel.4 Press the necessary buttons for enteringinformation about the data to be stored.Then press [OK].MFP LOCAL: Press this to store the data into the sharefolder of this equipment.REMOTE 1, REMOTE 2: Press either of them to store thedata into the share folder of a PC that is connectedwith this equipment via a network.Note• You can select up to 2 of [MFP LOCAL], [REMOTE 1]and [REMOTE 2]. You can cancel the selected item bypressing the same button again.• When a user who has the privilege of changing thesetting of [REMOTE 1] and [REMOTE 2] has pressedeither of them, the menu for specifying a directoryappears. In this case, see the following page to specifythe directory: P.58 "Setting share folder"FILE NAME: Press this to display the on-screenkeyboard. Then enter the file name within 128 letters.Note• The trailing characters in a file name (maximum 74)may be deleted depending on the type of letters used.FILE FORMAT: Select the file format in which the dataare stored from PDF, TIFF or XPS.MULTI / SINGLE: These are for selecting whether thedata are stored as a multiple page file or a single pagefile. If you select “MULTI”, all the scanned data will bestored as one file. If you select “SINGLE”, a folder iscreated and each page of the scanned data will bestored individually as one file in the folder.5 Press the [START] button on the controlpanel.When the original is placed on the RADF (ReversingAutomatic Document Feeder), copying and storing startsimultaneously.When the original is placed on the original glass, followthe procedure below.6 Place the next original on the original glass,and then press [NEXT COPY] on the touchpanel or the [START] button on the controlpanel.Repeat this step until the scanning of all the originals isfinished.7 When all have been scanned, press [JOBFINISH] on the touch panel.Copying and storing start.