BASIC COPY MODES- 53 -1234564 Select [SORT] or [GROUP], and then press[OK].5 Key in the desired number of copies.6 Select other copy modes as required, andthen press the [START] button on thecontrol panel.Staple sort modeWhen you make more than one set of copies, the copied papercan be automatically stapled set by set. This mode is called thestaple sort mode. You can choose from 2 different staplingpositions.Example: When [LEFT] is selectedNote• Special paper such as OHP film or sticker labels is notapplicable.• Copies in different sizes cannot be stapled unless theirlength is the same.1 Place paper in the tray(s).When using bypass copying, be sure to set the papersize.2 Place the original(s).3 Press [FINISHING] on the touch panel.4 Select the desired stapling position from[LEFT] or [RIGHT] and then press [OK].5 Select other copy modes as required, andthen press the [START] button on thecontrol panel.Memo• When the number of sheets exceeds the maximumnumber of sheets available for stapling, this equipmentautomatically enters into the sort mode.
