BASIC COPY MODES- 49 -1234565 Select other copy modes as required, andthen press the [START] button on thecontrol panel. Registering paper sizes to “OTHER”sizeIf you want to select a size other than the following for theoriginal size and copy paper size, you need to register the sizeas “OTHER” following the procedures below. Once you registerthis size, it will be specified every time you press [OTHER] onthe touch panel.North America: LG, LT,STOther than North America: A4, B5Note• You can register only standard sizes as [OTHER] andcannot register any non-standard sizes.1 Press [SIZE SETTING] on the touch panel.2 Select the desired size.The selected size will be registered as an “OTHER” size.Specifying reproduction ratio manually1 Place paper in the tray(s).2 Place the original(s).3 Press [ZOOM] on the touch panel.4 Press the buttons below to select thedesired reproduction ratio.[ UP] and [ DOWN] buttonsThe reproduction ratio changes by 1% every timeeither of them is pressed. When you hold either down,the ratio goes up or down automatically.One-touch zoom buttonsSelect the desired ratio from [400%], [200%], [100%],[50%] and [25%].Note• When the RADF is used, the maximum ratio availableis 200%.
