123456SENDING/RECEIVING A FAX- 60 -● SENDING/RECEIVING A FAXNoteInitializing the FAX is required to use the FAX for the first time.For details, refer to the Advanced Guide.Sending a FaxBasic proceduresThis section describes the basic procedures to send a fax. Fordetails of in-depth operations, see the page under eachprocedure as required.Besides the basic sending functions described in this page,there are various useful ways to send a fax. These proceduresare described in the following pages. P.69 "Other transmissions" Advanced Guide1 Place the original(s).Check the original size and scanning range, etc. Placethe original(s) on the original glass or RADF (ReversingAutomatic Document Feeder) in the correct direction.(The illustration above shows the original placed on theoriginal glass.) P.61 "Handling an original"2 Press the [FAX] button on the control panel.The fax screen is displayed. If you leave the screenunattended for the period of the auto clear setting time(45 sec. by manufacturer default), the screen returns tothe default one automatically.3 Press [OPTION] and set the transmissionconditions.The transmission condition setting screen is displayed.Set the transmission conditions such as resolution,original mode, exposure and transmission mode, asrequired. P.64 "Setting the transmission conditions"4 Specify the recipient.To specify the recipient, dial the number using the digitalkeys on the control panel or use the address book. P.66 "Specifying the recipient"
