Oki MC780 User Manual

Also see for ES7460 MFP: User manual User manual User manual User manual User manual

Contents

Oki MC780 User Manual Manual pdf 56 page image

BASIC COPY MODES- 56 -1234564 Select the desired mode, and then press[OK].[1->1 SIMPLEX]: 1-sided original to 1-sided copy[2->1 SPLIT]: 2-sided original to 1-sided copy5 Select other copy modes as required, andthen press the [START] button on thecontrol panel.Making a 2-sided copyMemo• If 1-sided portrait originals have been placed in a landscapedirection and you copy them on both sides of the paper,copied sheets are usually in the open to top/bottomdirection. You can make copies in the open to left/rightdirection with the image direction function.1 Place paper in the tray(s).When using bypass copying, be sure to set the papersize.2 Place the original(s).3 Press [2-SIDED] on the touch panel.4 Select the desired mode, and then press[OK].[1 -> 2 DUPLEX]: 1-sided original to 2-sided copy[2 -> 2 DUPLEX]: 2-sided original to 2- sided copy5 Select other copy modes as required, andthen press the [START] button on thecontrol panel.When placing the original on the original glass, followsteps 6 and 7 on P.31 "Basic copying procedure".Performing Copy & FileWith the Copy & File function, you can store the copied data inthe share folder of the hard disk of this equipment or aspecified PC on a network. The data can be stored in any ofPDF, TIFF and XPS formats.Note• The data will be stored as black images. (Resolution: 600dpi only) The data stored with this function are suited forprinting but not for being imported as an image into your PC.To obtain the optimal image quality for importing, it isrecommended to store the data with the Scan to Filefunction of this equipment.• The network administrator must make settings for Copy &File in advance. For details, refer to the TopAccess Guide.• It is recommended to back up the data stored in the sharefolder.