Oki MC780 User Manual

Also see for ES7460 MFP: User manual User manual User manual User manual User manual

Contents

Oki MC780 User Manual Manual pdf 58 page image

BASIC COPY MODES- 58 -123456Setting share folderWhen a user who has the privilege of setting a share folder haspressed [REMOTE 1] or [REMOTE 2], the menu for specifyinga directory appears.The setting items differ depending on the file transfer protocolto be used. FTP, SMB, NetWare IPX/SPX, NetWare TCP/IPand FTPS are selectable for a file transfer protocol.FTP / FTPSWhen you press any of the buttons below, the on-screenkeyboard appears. Enter with the buttons on the touch panel orthe digital keys on the control panel. When you finish the entry,press [OK].SERVER NAME: Press this to enter the IP address of FTPserver. For example, if the data should be transferred to anFTP folder ftp://10.10.70.101/user01/scan/, key in“10.10.70.101”.NETWORK PATH: Press this to enter a network path to anFTP folder where the data are to be stored. For example, ifthe data should be transferred to an FTP folder ftp://10.10.70.101/user01/scan/, enter “user01\scan”.LOGIN USER NAME: Press this to enter a user name to loginto the FTP server. Enter this as required.PASSWORD: Press this to enter a password to login to theFTP server. Enter this as required.COMMAND PORT: Press this to key in a command portnumber for executing commands. Normally “-” is entered inthis field, which means that a port number set by theadministrator will be used. Change this only when you wantto use any other port number.SMBWhen you press any of the buttons below, the on-screenkeyboard appears. Enter with the buttons on the touch panel orthe digital keys on the control panel. When you finish the entry,press [OK].NETWORK PATH: Press this to enter a network path to thefolder where the data are to be stored.LOGIN USER NAME: Press this to enter a user name toaccess the network folder. Enter this as required.PASSWORD: Press this to enter a password to access thenetwork folder. Enter this as required.Memo• If you selected [SMB], the settings for [SERVER NAME] and[COMMAND PORT] are not required.NetWare IPX / NetWare IPWhen you press any of the buttons below, the on-screenkeyboard appears. Enter with the buttons on the touch panel orthe digital keys on the control panel. When you finish the entry,press [OK].SERVER NAME: When you select [NetWare IPX], enter eitherthe server name of NetWare server or Tree/Context (if NDSis usable). When you select [NetWare IP], enter the IPaddress of NetWare server.NETWORK PATH: Press this to enter a network path to aNetWare server folder where the data are to be stored. Forexample, if the data should be transferred to a folder“sys\scan” of NetWare server, enter “\sys\scan”.LOGIN USER NAME: Press this to enter a user name to loginNetWare server. Enter this as required.PASSWORD: Press this to enter a password to login NetWareserver. Enter this as required.