English120 Fax2Net User’s Guide4. If there is no e-mail address registered for a Fax2Net account, pressthe NO X key until the display shows ONE TOUCH KEY PRG.[EMAIL] YES (W) NO (X).5. Press the W YES key and enter the e-mail address.6. Press the Start key.7. Procedure returns to Step 3.8. Press Select Function key when programming is finished.Note 1: When programming starts, the CAPS mode is OFF.Note 2: Whether or not e-mail addresses are entered correctly or not isnot confirmed.Note 3: It is not possible to designate an One Touch key where an e-mail address is registered to a group location if an accountnumber has not been programmed into the fax machine.Note 4: If a One Touch key with an e-mail address registered to it isregistered to a group, the One Touch key registration is deletedfrom the group if the account number is deleted. If there are noremaining destinations as a result, NOT PROGRAMMED isdisplayed for Location Selection.To do this UseEnter numbers Numeric keypadEnter + 8/+ One Touch keyEnter spaces 9/Space One Touch keyEnter hyphens Hyphen keyEnter alphabetic lettersLocate the desired letter on the numerickeypad. Press the key repeatedly until theletter required appears. Press the X NO keyto move to the next character.Switch between upper and lower case letters. Press 7/CAPS One Touch key.Enter unique charactersPress the 0/Unique key until the desiredcharacter appears (! # & ‘ ( ) * + , - . / : ; = ? @_ ~ \ % “) @ _ ~ \ % , can also be enteredusing One Touch keysMove cursor to make corrections W YES or X NO keys.
