English38Note: When the ISDN G4 option is installed, if a fax number is enteredwith the numeric keypad, the fax machine shows the currenttransmission mode G3 or G4. To select the current setting, presstheW YES key. To change the current setting, press the NOXkey first and confirm this new setting with theW YES key.Search key diallingIf you are not sure which One Touch key or Auto Dial number containsthe location you want to communicate with, use the Search key to lookthrough an alphabetical list of all of the Location IDs programmed intoyour fax machine.1. When selecting locations, press the Search key. The display willshow ENTER 1’ST CHAR.2. Repeatedly press the Search key to look through the entire list oflocations in alphabetical order, or locate the letter you want on thenumeric keypad, and press that key repeatedly to look throughLocation IDs beginning with that letter.3. Press the Start key as soon as the desired location appears on thedisplay.Real-time diallingNormally, your fax machine dials the entire number of the location youhave selected at one time. Occasionally, it may be necessary to dialnumbers in real time (one digit at a time). If your fax machine is equippedwith a handset, you can dial in real time by picking up the handset or pressthe Hook/V. Request key.Note: Real-time dialling with use of the Hook/V. Request key is notavailable in some countries. Also, when the ISDN option is fitted,real-time dialling is not available.DIALLING Your fax machine is dialling the number.CALLING The line is ringing.SENDING Your fax machine is sending the message.RESULT = OK The fax was sent successfully.COMMUN. ERRORIf you see this or another error message, a problem occurred duringthe communication. Try resending the fax. Refer to Problem Solvingfor assistance.Message Explanation
