English6802:MCF. (MULTI-LOC.): This function prints a general MessageConfirmation Report and a detailed Broadcast Confirmation Report aftereach multiple location transmission. Available settings are on and off.03:ERR. REPORT (MCF.): This function automatically prints aMessage Confirmation Report each time an error occurs during atransmission or polling transmission operation. Available settings are onand off.04:IMAGE IN MCF.: When a Message Confirmation Report isautomatically printed, this function adds a portion of the first page yourfax machine transmitted. This is printed at the bottom of the messageconfirmation report. Available settings are on and off.Note: This image function only becomes effective if user function17:MEM./FEEDER SW. is set to MEM and/or user function25:INSTANT DIALLING is set to ON.05:SENDER ID: This function controls the printing of your faxmachine’s Sender ID on the faxes you send. When turned on, your faxmachine’s Sender ID, date and time will be printed on each page slightlyoutside the image area of your document. When turned off, your SenderID, date and time will not be printed. However, some fax machines willprint your TSI/CSI.06:MONITOR VOLUME: This function sets the volume your faxmachine uses for telephone line monitoring sounds during dialling.Available settings are LOW, MID, H-MID, HIGH and OFF.07:BUZZER VOLUME: This function sets the volume of the variousbeep and alarm tones your fax machine emits during operations. Availablesettings are low, middle and high.08:CLOSED NETWORK: This function allows you to program yourfaxmachine to refuse to receive faxes from or transmit faxes to locationswhose telephone numbers have not been programmed into your faxmachine’s One Touch keys or Auto Dial numbers. Using this function,you can set up a closed network of fax machines. If you do not want yourfax machine to transmit faxes to or receive faxes from locations outsideyour network, select T/R. If you only want your fax machine to refuse toreceive faxes from outside your network, select RX. Available settings areOFF, T/R and RX09:TX MODE DEFAULT: This function allows you to change your faxmachine’s default type of original, transmit and copy resolution settings.Unless you select otherwise using the Transmit Resolution/W YES or
