EnglishChapter 3 - Dial Directories 339. The display shows G3 ECHO PROTECTION [OFF]. Press NO Xkey to change the setting and W YES key to select it.Note: If the ISDN option is installed, the display will show ISDN DIALMODE (G4). Press W YES key to select G4 as the dial mode forthis One Touch key or press NO X key to change to G3 dial modeand then press W YES key to select it.10. After pressing the W YES key, the display automatically showsLOCATION PROGRAMMING ENTER (SRCH, OT, A/D, #)11. To continue programming AUTO DIAL numbers, go back to Step3. If you are finished programming, press the Select Function key.Note: If you want to delete any programming for an Auto Dial number,follow Steps 1 - 4. At Step 5, press the 9/SPACE key until thenumber is deleted, then press the START key and continue withStep 11.Programming groupsOnce you have programmed some One Touch keys or Auto Dial numbers,you can then program these numbers into groups to allow you to send thesame fax to multiple locations. You can program up to 5 groups using amaximum of 80 numbers for all 5 groups into your fax machine.1. Press the Select Function key, then press the 8/Location ProgramOne Touch key. The display shows LOCATION PROGRAMMINGENTER (SRCH, OT, A/D, #)2. On the numeric keypad, press the # key. The display shows GROUPSETTING [ ] ENTER 1-53. Using the numeric keypad, enter the group number (1-5) you wantto program.4. The display shows the number of your current group and SELECTLOC.(S) YES (STR/LOC.) EXIT (X). You can now add a locationto your group (or delete a location from it). Refer to the instructionsbelow.To do this UseAdd a One Touch location Press the One Touch key. Press START to add it to the group.Add an Auto Dial location Press Auto Dial. Enter a 2 digit Auto Dial number. PressSTART to add it to the group.
