English124 Fax2Net User’s GuideNote 1: Pressing the Start key after entering the telephone (fax)number will set the fax machine in dialling or memoryscanning mode.Note 2: In the case of Auto Dial numbers (which are not applicable toe-mail addresses or web page URLs), the display will showAUTO DIAL NO. [XX] YES(W) NO (W/SRCH) in place of theONE TOUCH NO. [XX] display.Note 3: One Touch keys and Auto Dial numbers not yet programmedwith a destination will be displayed consecutively when theSearch key is pressed repeatedly.Note 4: If an account number is deleted, One Touch keys to which an e-mail address or web page URL have been registered will not bedisplayed.Note 5: The Copy key is disabled in the a function communicationsmode (e.g., specified time, broadcast, confidential, relay,polling, etc.).Note 6: If a document is waiting in the document feeder fortransmission, FUNCT. NOT AVAILABLE will be displayed.Note 7: If no locations are available, the display will show NOLOCATION AVAILABLE.Web page print request1. To carry out a web page print request a Fax2Net account must beestablished and the Fax2Net function must be switched ON.2. Press the One Touch key that has been programmed with the webpage URL and the fax machine dials the server.3. The URL of the web page being accessed will be shown whenconnection is made and then the machine returns to standby mode.4. The server will then dial the fax machine after retrieving the webpage URL and transmit it to the fax machine.Note 1: If no account is registered, ILLEGAL OPERATION will bedisplayed.Note 2: Only web URLs that are registered under One Touch keys (1-10) can be selected.Note 3: Web URLs are displayed from the top in the upper line.
