V - 5Section 5 - Chapter 2 - InstallationOKI OkiLAN 6120e User’s GuideLAN Manager/ ServerChapter 2InstallationOverviewTo install the OkiLAN 6120e:1. Install the OkiNet for OS/2 utilities software.2. Run the OkiNet for OS/2 utility to add a local printerport.3. Associate a print queue with the new local printerport.Once the installation is complete, you can verifycommunication by printing a configuration sheet.Network Preparation• You must have network administrator privileges toinstall the OkiLAN 6120e.• You must have physical access to an OS/2 file serverto host the OKI software utilities.• Write down the serial number and the Ethernetaddress of your OkiLAN 6120e.• OS/2 and LAN Manager/LAN Server must beconfigured with the following protocol:DLC/802.2 protocol stack• LAN Manager users must enable the remote bootfacility.• LAN Server 2.X users must run the LAN Serverinstallation utility and select the 802.2 protocol.• LAN Server 3.0 users must run the LAPS utility andselect the 802.2 protocol.• OS/2 Warp Users must run the MPTS utility andselect the 80w.w protocol. See your networkadministrator or the LAN Manager/LAN Servermanuals for instructions.
