III - 9Section 3 - Chapter 2 - OkiNet for NetWareOKI OkiLAN 6120e User’s GuideNetWareNDS SettingsNDS settings need to first be created and setup usingthe NWAdmin or PConsole utility. Create an NDS printserver object. Then, create one NDS printer object peroutput port. For example, Printer 1 goes to Port 1,Printer 2 goes to port 2. Attach NDS print queues to theNDS printer objects. Once you have created NDSobjects and queues, use the OkiNet for NetWare utilityto configure the following fields:• Preferred File Server - This is the file server onwhich the print server object was created.• Preferred Tree - This is the NDS tree on which theNDS print server object was created.• Print Server Name - The fully qualified (canonical)name of the NDS print server object that wascreated. The Print Server Name is case sensitive.Example:cn=marketinglj.ou=marketing.o=companynamewhere cn is the Common Name of the leaf object, ou isthe Organizational Unit name, and o is theOrganizational name.Note: After any change to the servicing of queues forthe OkiLAN 6120e from NWAdmin orPConsole, the OkiLAN 6120e must be reset viaOkiNet for NetWare.NetWare Queues ConfigurationOptionsThe NetWare Queues option allows you to add binderyprint queues to be serviced by first selecting eachdesired queue and then selecting the Æ button.To have a queue print to an output port other than thecurrently selected port, select the Output Port buttonand then select the desired port.