VI - 10Section 6 - Chapter 2 - OkiLAN 6120e Setup for Windows 95/98OKI OkiLAN 6120e User’s GuideChapter 2OkiLAN 6120e Set Up forWindows 95/98OverviewThis section contains instruction and information onhow to set up your OkiLAN 6120e for a Windows 95/98 environment. Print options for Windows 95/98include:• OkiLAN 6120e Connect for TCP/IP• OkiLAN 6120e Connect for DLC• OkiLAN 6120e Connect for IPX/SPXOkiLAN 6120e Connect for TCP/IPOkiLAN 6120e Connect for TCP/IP is a full featuredutility that allows simple, direct, TCP/IP printing fromyour computer to a printer attached to an OKI TCP/IPenabled print server. With OkiLAN 6120e Connect,you can even print to print servers using Dynamic IPaddresses (DHCP). Print jobs printed through OkiLAN6120e Connect are sent directly to the OkiLAN 6120eprint server and not routed through the network server,resulting in a reduction of network traffic.System RequirementsTo use OkiLAN 6120e Connect for TCP/IP, youroperating system must be Windows 95/98 and yourcomputer must be configured to run TCP/IP. TheOkiLAN 6120e print server must also be configured torun TCP/IP.InstallationTo install OkiLAN 6120e Connect for TCP/IP:1. Install the OkiLAN 6120e Connect for TCP/IP-seeSection I.2. When installation is complete, click on Start,Settings and then Printers.
