V - 6Section 5 - Chapter 2 - InstallationOKI OkiLAN 6120e User’s Guide• The initial installation requires the file server to bebrought down and then back up again. This may be aconsideration when you are planning your install.Depending on your current configuration, the followingsoftware may also be needed:• Printer driver installation diskettes. These diskettesare provided with the OS/2 operating system or areavailable from the printer manufacturer.• LAN Manager or LAN Server installation diskettes.Note: It is strongly recommended that you makebackup copies of the OS2.INI andOS2SYS.INI files before you install theOkiLAN 6120e. Follow the directions in yourOS/2 documentation to back up these files.Installing the Utilities SoftwareTwo software utilities are provided with the OkiLAN6120e: INSTALL and OkiNet for OS/2.InstallThe INSTALL utility copies both software utilities toyour OS/2 server and registers the OKI application withthe OS2.INI file. You will need to run INSTALL onetime only.OkiNet for OS/2The OkiNet for OS/2 utility completes the initialinstallation of the OkiLAN 6120e. In addition, you canrun the utility as needed to modify the configuration ofthe OkiLAN 6120e or to view port information.Note: The directory where OKI DLL files install,c:\OS2\DLL, must be the first entry in theLIBPATH command located in theCONFIG.SYS file. When you reboot thesystem, the OS/2 spooler will load the OKINetwork Printer Redirector.
