III - 4Section 3 - Chapter 1 - IntroductionOKI OkiLAN 6120e User’s GuideChapter 1: IntroductionOverviewThis section contains instructions and information onhow to configure your OkiLAN 6120e in the NetWareenvironment.There are three environments in which to configure theOkiLAN 6120e:• Bindery (NetWare 3.x)• NetWare Directory Services (NDS)–for NetWareversions 4.1 and later• NDPS for NetWare 4.x and 5.x.Before You Start• You should be familiar with network administrationas well as the physical setup and operation of yournetwork.• Write down the serial number and the Ethernet orToken-Ring address of your OkiLAN 6120e. Youwill find these numbers on the OkiLAN 6120eenclosure.• Install the OkiLAN 6120e hardware and connect thecabling-see Section I. Instructions for hardwareinstallation are found in Section I of this manual.• Install the OkiNet Utility for NetWare–see Section I.
