IV - 5Section 4 - Chapter 1 - IntroductionOKI OkiLAN 6120e User’s GuideTCP/IPChapter 1IntroductionOverviewThis section contains instructions and information onhow to configure your OkiLAN 6120e. You will also beinstructed on how to set up your host computers to printto the OkiLAN 6120e using the TCP/IP protocol.OkiLAN 6120e supports TCP/IP methods for printing:• Remote Line Printer Daemon (LPD)• File Transfer Protocol (FTP)• Printing directly through a TCP port (Raw PortPrinting)Additionally, if the DHCP protocol is enabled as adefault, the print server may be accessed through anordinary Internet Web browser, such as NetscapeNavigator, or by using TELNET. See Chapters 5 and 6in this section.Software RequirementsThe OkiLAN 6120e may be configured for TCP/IPusing the OkiNet for TCP/IP utility, or from a computersupporting the OkiNet for NetWare utility, BanyanVINES OkiNet for VINES utility (may apply to otherOkiLAN print server models), OR telnet and one of thefollowing:• Manual arp table entry and ping• Static route entry using route add command• DHCP• RARP• BOOTP
