II - 8Section 2 - Chapter 3 - HP Web JetAdmin SupportOKI OkiLAN 6120e User’s GuideChapter 3HP Web JetAdmin SupportOverviewThis section contains instructions and information onhow to configure, install, and obtain diagnosticinformation from your OkiLAN 6120e using theHewlett-Packard Web JetAdmin software.Software Requirements• Web JetAdmin 1.x, 2.x, 3.x, or 4.xNote: For more information on installing and usingHP Web JetAdmin, refer to the HP WebJetAdmin documentation.Configuring the OkiLAN 6120e UsingWeb JetAdmin1. From the main Web JetAdmin page, select theOkiLAN 6120e port you wish to configure.2. On the Properties page, click the Config button.3. Make any necessary changes to the options listedand click the corresponding Apply button.Installing a Windows NT Printer forthe OkiLAN 6120e1. From the main Web JetAdmin page, select theOkiLAN 6120e port you wish to install.2. On the Properties page, click the Install Printerbutton.3. In the Specify the device address… field, enter theprint server IP address, followed by a comma andthen the output port number. For example, to install aprinter for output port 2 of an OkiLAN 6120e withan IP address of 10.10.10.2, enter “10.10.10.2,2”.
