- 106 -Adjusting Color with the Control Panel4 Check the color balance adjustmentresults.(1) Print the color tuning pattern.(2) Use the print results for thecolor tuning pattern to check theadjusted results.If the pattern that seems mostsimilar to the adjacent CMY mixedcolors part and single color K partin the “Highlight”, “Mid-Tone”,or “Dark” areas matches the“Current” on the left of the colortuning pattern, the color balanceadjustment is complete.Repeat steps 1 through 3 of thisprocedure in accordance with theresults of your pattern check.Fine-tuning Color BalanceThe printer can implement compensationperiodically using auto density compensationmode. However, you can implement thisadjustment when you want to finely adjustthe gray balance of the halftones, which isnot sufficiently adjusted by the auto densitycompensation.Notez The densities of the colors are mutually dependent oneach other, so you will need to repeat adjustment severaltimes until the desired color balance is achieved.1 Print a color tuning pattern.(1) Press the key.The numerical values input screenwill be displayed.(2) Press <3>, <0>, <2>, and pressthe button.(3) Check that [Execute] has beenselected, and press the button.(4) The color tuning pattern will beprinted.
