- 75 -Table of Setting Items in the Control Panel Menu Screen[Calibration]z Shaded areas are factory-set values.Item Value DescriptionAuto Density Mode OnOffSets whether to automatically compensate densityand shade.Adjust Density Execute Implements density compensation. Implementwhen the device is in stand-by status.Adjust Registration Execute Implements auto color misalignment compensationoperations. Implement when the device is in stand-by status.Color Density Cyan Density -3~0~+3Adjusts the cyan density.This setting is enabled from printing after thedensity compensation has been implemented.Magenta Density -3~0~+3Adjusts magenta density.This setting is enabled from printing after thedensity compensation has been implemented.Yellow Density -3~0~+3Adjusts yellow density.This setting is enabled from printing after thedensity compensation has been implemented.Black Density -3~0~+3Adjusts black density.This setting is enabled from printing after thedensity compensation has been implemented.White Density*1 -3~0~+3Adjusts white density.This setting is enabled from printing after thedensity compensation has been implemented.Print Color Tuning Pattern Execute Prints patterns to match the shading characteristics.Base ColorTuningHighlight A-1A-2B-1B-2~O-1O-2Matches the color balance for the parts displayed asmost clear in the highlight area of the printed colortuning pattern.The matching results are reflected in the highlightmatching values for cyan, magenta, and yellowmatching.Mid-Tone A-1A-2B-1B-2~O-1O-2Matches the color balance for the parts displayed asmost clear in the mid-tone area of the printed colortuning pattern.The matching results are reflected in the mid-tonematching values for cyan, magenta, and yellowmatching.Dark A-1A-2B-1B-2~O-1O-2Matches the color balance for the parts displayedas most clear in the dark area of the printed colortuning pattern.The matching results are reflected in the darkmatching values for cyan, magenta, and yellowmatching.*1: Displayed with Pro1050 only.