- 188 -Configuration Tool Registering a Form (Form Overlay)You can register logos and other forms on theprinter and overlay them for printing. Here, wewill show how to register a form. Creating a Form1 Click [Start] and select [Control Panel]in [Windows System].2 Click [View devices and printers].Notez The printer driver has its own function forregistering forms.Normally, use the form registration function on theprinter driver.z Form registration when the length of 1 page oflabels, or of paper, is shorter than 4 inches, is notsupported by this procedure.Use the form registration function on the printerdriver.3 Right-click the [Pro1050 PCL6] icon,and then select [Printer Properties].4 Select the [Ports] tab, select check[FILE:] in [Printer Port], and then click[OK].5 Create the form you want to register onthe printer.6 On the application [File] menu, select[Print].7 Print.8 Enter a name for the file to be saved.9 On the [Port] tab, return the [Printerport] setting, which you changed instep 3 of this procedure, to its originalsetting. Using Configuration Tool to Register aForm on the Printer1 On the [Plug-ins] menu, select [StorageManager].2 Click [ ].3 Click [ ], and then select the createdform file.This adds the form to the project.4 Click the form file.5 Enter the [ID], and then click [OK].Notez Do not change the [Volume] and [Path Name]settings.6 In the bottom pane of the StorageManager plug-in screen, select theprinter.7 Click [ ].8 Click [OK].
