- 108 -Adjusting Color with the Control Panel(5) Select [Highlight], and press the button.(6) Specify a larger value than thecurrent set value, and press the button. Confirm there is acheck mark ( ) to the left of thespecified value.Memoz Select +0.1 to +4.0 to make density slightlydarker, or -0.1 to -4.0 to make it slightly lighter.Note, however, that the black adjustment rangesare +0.1 to +3.0 and -0.1 to -3.0.(7) Press the button toreturn to the standby screen.4 Check the color balance adjustmentresults.(1) Print the color tuning pattern.(2) Use the print results for thecolor tuning pattern to check theadjusted results.Repeat steps 1 through 3 of thisprocedure in accordance with theresults of your pattern check.
