- 25 -Loading Media4 Slide roll paper onto the Roll PaperHolder shaft as far as it will go.Notez Make sure to slide the roll paper as far as it will go.Insufficiently sliding the roll paper can adverselyaffect print position accuracy.z Take care to avoid pinching your fingers or handswhen sliding the roll paper.5 Rotate the Roll Paper Holder Knob to fixthe roll paper core in place.Notez Rotate the Roll Paper Holder Knob until it clicks.6 Aligning the Flange with the Roll PaperHolder shaft as shown in the illustration,attach the Flange.7 Slide the Flange as far as it will go inaccordance with the roll paper width.Notez Slide the Flange up to the side of the loaded rollpaper.z Take care to avoid pinching your fingers or handswhen attaching the Flange.
