- 180 -Using a Web Browser to Configure the Network Setup To configure IEEE802.1 settings1 Log in as an administrator.Referencez See "Logging in as an Administrator" (P.154).2 On the [Admin Setup] tab, click[Network Setup].3 Click [IEEE802.1X].Referencez If PEAP is to be used, proceed to " To use PEAP".If EAP-TLS is to be used, proceed to " To use EAP-TLS". To use PEAP4 For the [IEEE802.1X] setting, select[Enable].5 For [EAP Type], select [PEAP].6 In [EAP User], enter the user name.7 In [EAP Password], enter the password.8 Select the [Authenticate Server] checkbox.